|
|
Build Your Online Product Catalogs?
| Product Name: |
Light Weight Foamed Concrete Blocks Machine
|
| Supply Ability: |
|
| Related proudcts |
blocks machine, |
| Specifications |
aac |
| Price Term: |
FOB |
| Port of loading: |
Qingdao |
| Minimum Order |
1set |
| Unit Price: |
US $ 10,000-10,000,000/ Set |
|
The advantage of aac block
1 Light weight
The weight of aac block (aerated concrete block)are 500-700kg/m3m regularly, only the equivalent of clay brick 1/4-1/5 and ordinary concrete 1/5
2,high thermal insulating effect
The thermal conductivity of light brick is1/6 of the ordinary concrete and its thermal insulation performance is superior to that of 240mm thick clay brick wall.
3. .Earthquake Resistant
The light brick has light capacity, good overall performance and small inertia force in the earthquake
4. good processing performance
it can bring great convenience and flexibility to construction
5. A certain high temperature resistance
The compressive strength of light brick (aerated concrete block) increases slightly at a temperature of 600 degrees below
6. good sound insulation
The inner structure of light brick is the same as bread which distributes a large number of closed pores uniformly
And other advantage:strong adaptability Cost saving Water Barrier Energy Efficient
Descriptions of Production Process of aac block
1. Treatment of Raw Materials
2. Ingredient pouring
After the above materials are prepared, electronic scale measures them respectively, mixer mixing them, thereafter, adding the measured aluminum powder, mixing for 45s, and pouring into mold.
3. Cutting
After pouring and foaming, the base quietly stops to certain hardness for cutting. Overturning the base 90 degrees through the overturning cutting machine, firstly cutting horizontally, and then cutting vertically.
4. Steam curing
The cut base reaches certain quantity through travelling marshalling, and then entering to still kettle for 4h curing
Features of Production Process of Aerated autoclaved concreted block machine
1. Fixed-point pouring
2. Mechanical cutting
3. Full automatic centralized control
4. Large ***ce design of factory building
5. Adopt pre-curing before cutting
6. Adopt pre-curing before steam curing
7. Use both vacuumization process and degassing process
Our advantage
With years of sp |
| Company: |
Weifang Shengbei Trading Co.,Ltd
|
| Contact: |
Mr. Lifeng Gao |
| Address: |
remises on the 6th floor in the south district of Xinhuayuan Comprehensive Office blocks, at the intersection of Jinma Road, Bei |
| Postcode: |
|
| Tel: |
0086-536-8823666 |
| Fax: |
0086-536-8823666 |
| E-mail: |
|
|
|
|
Home
